mirror of
https://github.com/alfishe/amiga-bootcamp.git
synced 2026-06-13 00:26:28 +00:00
Comprehensive technical documentation covering: - Hardware: OCS/ECS/AGA custom chip registers, Copper & Blitter deep dives - Boot sequence: cold boot through startup-sequence - Binary format: HUNK executable spec, relocation, debug info - Linking & ABI: .fd files, LVO tables, register calling conventions - Exec kernel: tasks, interrupts, memory, signals, semaphores - AmigaDOS: file I/O, FFS/OFS layout, CLI/Shell scripting - Graphics: planar bitmaps, Copper programming, HAM/EHB modes - Intuition: screens, windows, IDCMP, BOOPSI - Devices: trackdisk, SCSI, serial, timer, audio, keyboard - Libraries: utility, expansion, IFFParse, locale, ARexx - Networking: bsdsocket API, SANA-II, TCP/IP stack comparison - Toolchain: GCC, vasm/vlink, SAS/C, NDK, debugging - Reverse engineering: IDA/Ghidra setup, compiler fingerprints, case studies - CPU & MMU: 68040/060 emulation libs, PMMU, cache management - Driver development: SANA-II, Picasso96/RTG, AHI audio All files include breadcrumb navigation. No local paths or proprietary content.
1.8 KiB
1.8 KiB
OCS Chipset — A500 / A1000 / A2000
Overview
The Original Chip Set (OCS) ships in the Amiga 1000 (1985), A500 (1987), and early A2000 boards. It consists of three custom chips: Agnus, Denise, and Paula, supported by the MOS 8520 CIA pair.
Chip Summary
| Chip | MOS Part | Primary Responsibilities |
|---|---|---|
| Agnus | 8361 (PAL), 8367 (NTSC) | DMA controller, Copper coprocessor, Blitter, address generation |
| Denise | 8362 | Display: bitplane fetch decode, sprite decode, colour output |
| Paula | 8364 | Audio DMA (4 channels), floppy disk I/O, serial port, interrupts |
Contents
| File | Topic |
|---|---|
| chipset_ocs.md | Chip internals, DMA priorities, bus arbitration |
| custom_registers.md | Full OCS register map $DFF000–$DFF1FE |
| copper.md | Copper coprocessor: WAIT/SKIP/MOVE, copperlist format |
| blitter.md | Blitter: channels A/B/C/D, minterms, line mode, fill |
| paula_audio.md | Audio DMA: AUDxLCH/LCL/LEN/PER/VOL, interrupt |
| paula_serial.md | Serial port: SERPER/SERDATR, baud rate |
| sprites.md | Hardware sprites: SPRxPTH, control words, attach mode |
OCS Limitations vs ECS/AGA
- Max 512 KB Chip RAM on A500 rev 5 and earlier (Agnus 8361/8367 addresses 512 KB only)
- A500 rev 6+ allows 1 MB with Fat Agnus (part of later OCS run)
- No productivity display modes (ECS adds BEAMCON0)
- 32 colours max (or 64 EHB, or HAM 12-bit) in standard bitplane modes
- Blitter is 16-bit; no 64-bit fetch (AGA adds FMODE)
- No ECS Denise border features
References
- ADCD 2.1 Hardware Manual: http://amigadev.elowar.com/read/ADCD_2.1/Hardware_Manual_guide/node0000.html
- Amiga Hardware Reference Manual 3rd ed., Chapter 5–8