amiga-bootcamp/08_graphics/ham_ehb_modes.md

← Home · Graphics

HAM and EHB — Special Display Modes

Overview

The Amiga offers two unique display modes that squeeze many more colors from limited bitplane hardware: EHB (Extra Half-Brite) and HAM (Hold-And-Modify). These modes have no direct equivalent on other platforms and are critical for understanding Amiga graphics capability and for FPGA implementation.

---

EHB — Extra Half-Brite (OCS/ECS/AGA)

How It Works

Uses 6 bitplanes (64 possible values):

• Bitplane values 0–31: index into the 32-color palette normally
• Bitplane values 32–63: display the color from register (value − 32) at half brightness (all RGB components shifted right by 1)

flowchart LR
    BP["6 Bitplanes"] --> SPLIT{"Bit 5?"}
    SPLIT -->|"0"| NORMAL["Bits 4-0 = index<br/>Palette lookup"]
    SPLIT -->|"1"| EHB["Bits 4-0 = index<br/>Palette lookup<br/>then R>>1, G>>1, B>>1"]
    NORMAL --> DAC["RGB to DAC"]
    EHB --> DAC

    style EHB fill:#fff3e0,stroke:#ff9800,color:#333
    style NORMAL fill:#e8f4fd,stroke:#2196f3,color:#333

Example pixel value = 37 (binary: 100101):
  Bit 5 = 1 → half-brite
  Bits 4-0 = 00101 = palette index 5
  Output color = palette[5] >> 1 (each R,G,B component halved)

Example pixel value = 5 (binary: 000101):
  Bit 5 = 0 → normal
  Bits 4-0 = 00101 = palette index 5
  Output color = palette[5] (full brightness)

Programming EHB

/* EHB is automatic when using 6 bitplanes without HAM flag: */
struct Screen *scr = OpenScreenTags(NULL,
    SA_Width,     320,
    SA_Height,    256,
    SA_Depth,     6,              /* 6 planes → EHB mode */
    SA_DisplayID, EXTRAHALFBRITE_KEY,
    TAG_DONE);

/* Set the 32 base colors: */
ULONG colors32[32 * 3 + 2];
colors32[0] = 32 << 16;  /* count = 32, first = 0 */
/* ... fill RGB values ... */
colors32[32 * 3 + 1] = 0;  /* terminator */
LoadRGB32(&scr->ViewPort, colors32);

/* Pixels 0–31 use base palette directly.
   Pixels 32–63 are automatically half-brightness versions.
   No need to set colors 32–63 — hardware does it. */

---

HAM6 — Hold-And-Modify (OCS/ECS/AGA)

Pixel Encoding

Uses 6 bitplanes. Each pixel's 6 bits are split into a 2-bit command and 4-bit data:

flowchart TD
    subgraph "6-Bit Pixel Value"
        direction LR
        CMD["Bits 5-4<br/>(command)"] --- DATA["Bits 3-0<br/>(data)"]
    end

    CMD --> C00["00 = SET"]
    CMD --> C01["01 = MOD BLUE"]
    CMD --> C10["10 = MOD RED"]
    CMD --> C11["11 = MOD GREEN"]

    C00 --> R00["Output = Palette at data<br/>R,G,B all from palette"]
    C01 --> R01["Output = prev_R, prev_G, data<br/>Only Blue changes"]
    C10 --> R10["Output = data, prev_G, prev_B<br/>Only Red changes"]
    C11 --> R11["Output = prev_R, data, prev_B<br/>Only Green changes"]

    style C00 fill:#c8e6c9,stroke:#2e7d32,color:#333
    style C01 fill:#bbdefb,stroke:#1565c0,color:#333
    style C10 fill:#ffcdd2,stroke:#c62828,color:#333
    style C11 fill:#c8e6c9,stroke:#2e7d32,color:#333

How the Hardware Decodes — Per-Pixel Pipeline

flowchart LR
    PREV["Previous pixel<br/>R=A G=7 B=3"] --> DECODE{"Command?"}
    DECODE -->|"00 (SET)"| PAL["Palette[data]<br/>R=F G=0 B=8"]
    DECODE -->|"01 (MOD B)"| MODB["R=A G=7 B=data"]
    DECODE -->|"10 (MOD R)"| MODR["R=data G=7 B=3"]
    DECODE -->|"11 (MOD G)"| MODG["R=A G=data B=3"]

    PAL --> NEXT["Current pixel<br/>→ becomes 'previous'<br/>for next pixel"]
    MODB --> NEXT
    MODR --> NEXT
    MODG --> NEXT

Important

Each scanline starts fresh — the first pixel of each line has no "previous pixel" to modify. The hardware resets to the background color (register 0) at the start of each line. This is why HAM images often have a visible "color ramp" at the left edge.

Practical Example — Encoding a HAM6 Scanline

Suppose we want to display these colors on a scanline:

Target:  RGB(A,7,3) → RGB(A,7,F) → RGB(F,7,F) → RGB(F,0,8)

Encoding:
  Pixel 0: 00 xxxx (SET palette[n] = A,7,3)  → SET to base color
  Pixel 1: 01 1111 (MOD BLUE = F)            → A,7,3 → A,7,F  ✓
  Pixel 2: 10 1111 (MOD RED = F)              → A,7,F → F,7,F  ✓
  Pixel 3: 00 xxxx (SET palette[m] = F,0,8)  → SET to nearest base color

Note: pixel 3 needs to change ALL THREE components.
Since HAM can only modify ONE component per pixel, we must either:
  a) Use 3 pixels to transition (changing R, G, B separately) → "fringing"
  b) Pick a base palette color that's close to the target → "SET"

The Fringing Problem

flowchart LR
    subgraph "Desired: sharp edge"
        direction LR
        R1["R:F,0,0"] --- R2["R:F,0,0"] --- R3["R:F,0,0"] --- G1["G:0,F,0"] --- G2["G:0,F,0"] --- G3["G:0,F,0"]
    end

    subgraph "HAM6 reality: 2-pixel fringe"
        direction LR
        H1["SET red<br/>F,0,0"] --- H2["SET red<br/>F,0,0"] --- H3["MOD_R 0<br/>0,0,0"] --- H4["MOD_G F<br/>0,F,0"] --- H5["SET green<br/>0,F,0"] --- H6["SET green<br/>0,F,0"]
    end

    style H3 fill:#ffcdd2,stroke:#c62828,color:#333
    style H4 fill:#ffcdd2,stroke:#c62828,color:#333

Pixels H3 and H4 are fringing artifacts — wrong colors visible during the transition. The encoder must change R, G, B individually (one per pixel), so sharp multi-component transitions always produce visible intermediate colors.

The encoder (usually offline) optimizes palette choice and pixel encoding to minimize fringing. Common strategies:

• Choose 16 base palette colors via median-cut from the image histogram
• Use SET pixels at strong edges
• Sequence MODIFY commands to approach target in fewest steps

flowchart TD
    IMG["Source Image<br/>(24-bit RGB)"] --> HIST["Histogram Analysis"]
    HIST --> MEDCUT["Median-Cut<br/>Select 16 base colors"]
    MEDCUT --> PAL["Optimal 16-entry palette"]

    IMG --> SCAN["Process scanlines<br/>left to right"]
    PAL --> SCAN

    SCAN --> DECIDE{"Distance to target?"}
    DECIDE -->|"Close base color exists"| SET["SET command<br/>(no fringing)"]
    DECIDE -->|"Only 1 component differs"| MOD["MODIFY command<br/>(no fringing)"]
    DECIDE -->|"2-3 components differ"| FRINGE["2-3 MODIFY sequence<br/>(fringing visible)"]

    style FRINGE fill:#ffcdd2,stroke:#c62828,color:#333
    style SET fill:#c8e6c9,stroke:#2e7d32,color:#333
    style MOD fill:#c8e6c9,stroke:#2e7d32,color:#333

Programming HAM6 from C

/* Open a HAM6 screen: */
struct Screen *scr = OpenScreenTags(NULL,
    SA_Width,     320,
    SA_Height,    256,
    SA_Depth,     6,
    SA_DisplayID, HAM_KEY,
    TAG_DONE);

/* Set the 16 base palette colors: */
ULONG hamPalette[16 * 3 + 2];
hamPalette[0] = 16 << 16;  /* count=16, first=0 */
/* Palette entry 0: R=$A0, G=$70, B=$30 (12-bit values scaled to 32-bit) */
hamPalette[1] = 0xA0000000;  /* R */
hamPalette[2] = 0x70000000;  /* G */
hamPalette[3] = 0x30000000;  /* B */
/* ... fill remaining 15 entries ... */
hamPalette[16 * 3 + 1] = 0;
LoadRGB32(&scr->ViewPort, hamPalette);

/* Write pixels directly to bitplane data: */
/* Each pixel = 6 bits across 6 bitplanes */
struct BitMap *bm = scr->RastPort.BitMap;
UBYTE *plane[6];
for (int p = 0; p < 6; p++)
    plane[p] = bm->Planes[p];

/* Encode pixel at position x on line y: */
void SetHAMPixel(UBYTE *plane[], int x, int y, UBYTE cmd, UBYTE data)
{
    int byteOffset = y * 40 + (x >> 3);  /* 40 bytes/line for 320px */
    int bitPos = 7 - (x & 7);
    UBYTE val = (cmd << 4) | (data & 0x0F);  /* 6-bit HAM value */

    for (int p = 0; p < 6; p++)
    {
        if (val & (1 << p))
            plane[p][byteOffset] |= (1 << bitPos);
        else
            plane[p][byteOffset] &= ~(1 << bitPos);
    }
}

/* Example: SET color 5, then modify blue to $F: */
SetHAMPixel(plane, 0, 0, 0x00, 5);    /* 00 0101 = SET palette[5] */
SetHAMPixel(plane, 1, 0, 0x01, 0xF);  /* 01 1111 = MOD BLUE = $F */

---

HAM8 — AGA Enhanced HAM

Pixel Encoding

Uses 8 bitplanes. Same principle, wider data:

Bits 7–6	Meaning	Bits 5–0
00	SET — palette index	6-bit index (0–63 of 256-entry palette)
01	MODIFY BLUE	6-bit blue value (0–63)
10	MODIFY RED	6-bit red value (0–63)
11	MODIFY GREEN	6-bit green value (0–63)

Improvements over HAM6

Aspect	HAM6	HAM8
Base palette entries	16	64
Color component precision	4-bit (16 levels)	6-bit (64 levels)
Total color space	12-bit (4,096)	18-bit (262,144)
Fringing severity	Severe	Mild (more base colors to SET from)
Memory per 320×256 screen	6 × 40 × 256 = 60 KB	8 × 40 × 256 = 80 KB

HAM8 Palette Setup

/* HAM8 uses 64 of the 256 AGA palette entries as base colors: */
struct Screen *scr = OpenScreenTags(NULL,
    SA_Width,     320,
    SA_Height,    256,
    SA_Depth,     8,
    SA_DisplayID, HAM_KEY,  /* HAM flag + 8 planes = HAM8 on AGA */
    TAG_DONE);

/* Load all 256 palette entries (HAM8 uses entries 0–63 as base): */
ULONG palette[256 * 3 + 2];
palette[0] = 256 << 16;  /* count=256, first=0 */
/* AGA palette is 24-bit — each component is 8 bits stored in upper byte: */
palette[1] = 0xFF000000;  /* Entry 0 red = $FF */
palette[2] = 0x00000000;  /* Entry 0 green = $00 */
palette[3] = 0x00000000;  /* Entry 0 blue = $00 */
/* ... fill 255 more entries ... */
palette[256 * 3 + 1] = 0;
LoadRGB32(&scr->ViewPort, palette);

---

DMA Timing — How Bitplane Data Reaches the Display

Bitplane-to-Pixel Pipeline

flowchart LR
    CHIP["Chip RAM<br/>(Bitplane data)"] -->|"DMA fetch"| SR["Shift Registers<br/>(6 or 8 parallel)"]
    SR -->|"1 bit per plane<br/>per pixel clock"| MUX["Bitplane MUX<br/>6/8-bit value"]
    MUX --> MODE{"Display Mode?"}
    MODE -->|"Normal"| PAL["Palette Lookup<br/>32/256 entries"]
    MODE -->|"EHB"| EHB["Palette + Halve"]
    MODE -->|"HAM"| HAM["HAM Decoder<br/>(cmd + prev pixel)"]
    PAL --> DAC["RAMDAC<br/>→ Video Out"]
    EHB --> DAC
    HAM --> DAC

    style HAM fill:#fff9c4,stroke:#f9a825,color:#333
    style EHB fill:#fff3e0,stroke:#ff9800,color:#333
    style PAL fill:#e8f4fd,stroke:#2196f3,color:#333

Scanline DMA Fetch Cycle

The display hardware fetches bitplane data in DMA slots during each scanline:

One scanline (~64 µs PAL):
┌────────┬──────────────────────────────────────────┬────────┐
│ HBlank │          Active Display Area             │ HBlank │
│        │← DMA fetch window (variable width) →     │        │
└────────┴──────────────────────────────────────────┴────────┘

DMA slots consumed per bitplane per lowres line:
  1 bitplane  = 8 DMA words (16 bytes)
  6 bitplanes = 48 DMA words  (HAM6/EHB)
  8 bitplanes = 64 DMA words  (HAM8)

HAM Decode Pipeline (Hardware)

The HAM decoder operates one pixel clock behind the bitplane data output:

Bitplane DMA → Bitplane shift registers → HAM decoder → Color register → DAC → Video out
                                          ↑
                                    1-pixel delay
                                    (needs previous pixel's color)

For FPGA implementation, the HAM decoder is a simple combinational circuit:

// HAM6 decoder (simplified)
always @(*) begin
    case (pixel_data[5:4])
        2'b00: begin  // SET
            out_r = palette[pixel_data[3:0]][11:8];
            out_g = palette[pixel_data[3:0]][7:4];
            out_b = palette[pixel_data[3:0]][3:0];
        end
        2'b01: begin  // MODIFY BLUE
            out_r = prev_r;
            out_g = prev_g;
            out_b = pixel_data[3:0];
        end
        2'b10: begin  // MODIFY RED
            out_r = pixel_data[3:0];
            out_g = prev_g;
            out_b = prev_b;
        end
        2'b11: begin  // MODIFY GREEN
            out_r = prev_r;
            out_g = pixel_data[3:0];
            out_b = prev_b;
        end
    endcase
end

---

Standard Palette Modes — For Comparison

Setting Palette Colors (Non-HAM)

/* OS 3.0+ — 24-bit precision (AGA): */
ULONG colors[3 * 3 + 2];  /* 3 colors */
colors[0] = 3 << 16;  /* count=3, first entry=0 */
/* Entry 0: black */
colors[1] = 0x00000000; colors[2] = 0x00000000; colors[3] = 0x00000000;
/* Entry 1: bright red */
colors[4] = 0xFF000000; colors[5] = 0x00000000; colors[6] = 0x00000000;
/* Entry 2: pure blue */
colors[7] = 0x00000000; colors[8] = 0x00000000; colors[9] = 0xFF000000;
colors[10] = 0;  /* terminator */
LoadRGB32(vp, colors);

/* OCS/ECS — 12-bit precision: */
UWORD oldPalette[] = { 0x000, 0xF00, 0x00F };  /* 4 bits per channel */
LoadRGB4(vp, oldPalette, 3);

/* Direct hardware (bypass OS — for demos/games): */
custom->color[0] = 0x000;   /* $DFF180: COLOR00 (background) */
custom->color[1] = 0xF00;   /* $DFF182: COLOR01 */
custom->color[2] = 0x00F;   /* $DFF184: COLOR02 */
/* AGA: extra bits via BPLCON3 bank select */

Color Cycling (Palette Animation)

/* Rotate palette entries for animation — common demo/game technique: */
void CyclePalette(struct ViewPort *vp, int first, int last)
{
    ULONG saved[3];  /* save last entry */
    GetRGB32(vp->ColorMap, last, 1, saved);

    /* Shift all entries up by one: */
    for (int i = last; i > first; i--)
    {
        ULONG rgb[3];
        GetRGB32(vp->ColorMap, i - 1, 1, rgb);
        SetRGB32(vp, i, rgb[0], rgb[1], rgb[2]);
    }

    /* Wrap last to first: */
    SetRGB32(vp, first, saved[0], saved[1], saved[2]);

    /* Force display update: */
    MakeVPort(GfxBase->ActiView, vp);
    MrgCop(GfxBase->ActiView);
    LoadView(GfxBase->ActiView);
}

Tip

Color cycling is extremely cheap — only palette registers change, not pixel data. A single SetRGB32 call costs a few microseconds vs redrawing the entire screen. This is why palette animation was so popular on the Amiga.

---

Comparison Table

Feature	Normal (5-plane)	EHB	HAM6	HAM8
Bitplanes	5	6	6	8
Chipset	OCS/ECS/AGA	OCS/ECS/AGA	OCS/ECS/AGA	AGA only
Programmable colors	32	32	16	64
Total on-screen	32	64	4,096	262,144
Color depth	12-bit (OCS) / 24-bit (AGA)	12/24-bit	12-bit	18-bit
Fringing	None	None	Significant	Mild
Good for	GUI, games	GUI with shadows	Photos, static art	Photos, video stills
Bad for	Photo-realism	Limited palette control	Animation, scrolling	Memory: 80 KB/frame
DMA words/line (lores)	40	48	48	64

---

References

• HRM: Display modes chapter — HAM decode logic
• NDK39: graphics/displayinfo.h — HAM_KEY, EXTRAHALFBRITE_KEY
• See also: display_modes.md — ModeID system and chipset comparison
• See also: copper_programming.md — Copper-driven palette tricks
• See also: bitmap.md — bitplane memory layout